www.finglai.com
▇
Characteristics
1. Every day or every week with 16 times ON/OFF;
2. The switch time can be cycle by day or week;
3. The longest control time is 168 hours, the shortest control time is 1 minute
▇
Use the method
If you use this product in your first time, can click on the “C” key by a small wood, which is mean
restore the factory state.
1. Time setting
Hold the "clock" button then press "H-", "M+", "D+" key to adjust hour, minute, week.
2. Set regular time
A. Press the "P" key, the bottom left of the display shows "1
次开
" words (mean the first time to open).
Press the "H-", "M+", "D+" keys, enter the required opening time.
B. then click the "P" key, the bottom left of the display "1
次关
" words (mean the first off time). And
then press the "H-", "M+", "D+" key, enter the required closing time.
C. Continue to press the "P" key, the bottom left of the display will be displayed
“2
次开
... 16
次开
, 16
次关
” ordinally, refer to the above "A, B" step, set each time. Press the "Clock" key to return the time
when the number of switches is set.
D. When set error or want to cancel the redundant settings, Press the "Cancel / Resume" button to
cancel the setting, press the "Cancel / Resume" button again to restore the canceled settings.
E. press the "set" button, press the "D+" key, you can set the same daily time or different daily time.
Monday to Friday the same, Monday through Saturday or Saturday to Sunday the same or different
cycle.
Chinese
code
一
二
三
四
五
六
日
English
meaning
Monday
Tuesday
Wednesday
Thursday
Friday
Saturday
Sunday
F. control mode selection:
Press "manual / automatic" button, the bottom of the display will be displayed "
开
", "
自动运行
", "
关
"
words, said the selected control output. "
自动运行
" is the automatic control mode, and the output time
is controlled by the set time.
▇
Wiring (N mean neutral wire, L mean fire wire)
1, The direct control of the wiring: Control of the electrical appliances are single-phase power supply,
power consumption does not exceed the rated capacity of the switch, can be used direct control,
wiring as shown in Figure 1:
N
P
ow
er
in
Load
N
KG316T
out
