Step 3: Install Left and Right Pedal - IMPORTANT!
a) Place the Left Pedal (35L) parallel to the ground, 90° vertical to the crank, and turn
counter-clockwise
into the left crank. Tighten with Tool B.
b) Place the Right Pedal (35R) parallel to the ground, 90° vertical to the crank, and turn
clockwise
into the right crank. Tighten with Tool B
10
WARNING
：
1. Make sure there is 90°
angle between crank and
pedal.If it feels stuck when
you turn the pedal in,
unscrew the pedal and try
again. Do not force the
pedal in. It will damage
the thread.
2. Tighten the pedal once
a month.
Step 4: Install Plastic Sleeve and Handlebar Post
a) Insert Plastic Sleeve (63) into Main Frame (1) until you hear a click. Make sure the
plastic sleeve is properly fitted.
b) Slide the Handlebar Post (4) into the Plastic Sleeve (63), and tighten with the L shape
Pop Pin (23).
TOP
Bottom
WARNING
：
When you are adjusting the
height of handlebar, always
make sure the L shape Pop
Pin is properly inserted into
the hole
。
a
a
b
