Protected by one or more US Patents: 8915613; D702,391; D702,390; D700,732; D727,554 S; D727,550 S, D727,551 S
© 2017 FINELITE, INC. ALL RIGHTS RESERVED. Form 98383 V2. 04/17
HP-6 Recessed Flush Diffuser Tech Zone 6" T-Bar
Joiner/Ender
Installation Instructions
Note: All power connections to be installed to local/national codes
by a Certified Electrician.
Finelite, Inc. • 30500 Whipple Road • Union City, CA 94587-1530 • (510) 441-1100 • Fax: (510) 441-1510 • www.finelite.com
1
Step 1
Step 2
Remove diffuser from joiner/ender and set aside to prevent it from getting dirty or damaged. NOTE: If part of a longer run, diffuser will
be reinstalled back into original luminaire section as lengths vary.
Install joiner/ender onto ceiling next to starter.
0 - 10V
Dimming
Scan QR code for
helpful video(s)
Joiner/Ender
Diffuser
Starter
Joiner/Ender
Secure to Structure
(by others)
Step 3
Install T-Bar brackets onto joiner/ender luminaire. Secure with #8-18 x 1/4" screws (provided). Secure luminaire to structure using tie-wire
(by others), as per code.
Remove backplate clips to release the backplates. We recommend using a flat head screwdriver to remove them.
CAUTION: Do not lose these pieces.
Step 4
Joiner/Ender
Starter
T-Bar Bracket
Joiner/Ender
Secure to
Structure
(by others)
#8-18 x 1/4" Self Drilling
Screws (Provided)
Backplate Clips
4"
6"
Center-to-Center
T-Bar Spacing
9/16" Tech Zone 6"
