3. Adjust the high frequency and low frequency conversion switch of this unit to High or Low.
- This is to select frequency that music is mostly received, of FM radio frequency of a car and
frequency of this unit.
High = 107.5, 107.7, 107.9 (MHz)
Low = 106.7, 106.9, 107.1 (MHz)
4. Set the FM frequency adjustment switch of the unit to one of 6 frequencies.
- If selecting HIGH in the third step, you can select one of 107.5,107.7, 107.9 (MHz) and if selecting
LOW in the third step, you can select one of Low = 106.7, 106.9, 107.1 (MHz)
5. Turn power of the FM radio tuner in a car and then set frequency to one of frequencies
selected in the fourth step.
- If using automatic search function of the FM radio, you can stop at frequency set in the above 3-4
step.
6. If replaying music by turning power of the MP3 player on, sound comes out via speakers in
a car.
- If music is heard, appropriately adjust sound volume of the FM radio and the MP3 player. If output
is too strong, phenomena that sound is distorted occurs. If it is too weak, noise sound is heard. For
the MP3 player, sound volume of 3/4 or so (7~8 mW) is appropriate. You can hear after adjusting
sound volume of the FM radio tuner as the receipt part.
- Since this unit transmits music wirelessly, noise may occur depending on direction of the antenna.
Noise may also occur where there are devices to generate other noise.
- You can let music of the MP3 player via a speaker as above through FM frequency of audio or
cassette radio. In this case, you can use the unit near audio where receipt is well done.
