Color Screen Multi-channel Weather Station User Manual
7
Figure 6
Figure 7
3.6 Display Console Set Up
Place the remote thermo-hygrometer about 5 to 10 meters away from the
display console (if the sensor is too close, it may not be received by the
display console).
1. Insert the power adapter into the power jack of the console, and plug in
the adapter. The LCD display will beep once and then light up. The
brightness selection is set to high when plugged into the adapter. Press
the
LIGHT/SNOOZE
key can adjust among HIGH/MIDDLE/OFF level
according to your preference.
2. Remove the battery door on the back of the display. Insert three AAA
(alkaline or lithium, avoid rechargeable) batteries in the back of the
display console. Looking at the back of the unit (left to right), the
polarity is (+) (-) for the top battery, (-) (+) for the middle battery and (+)
(-) for the bottom battery.
Note:
To avoid permanent damage, please take note of the battery
polarity before inserting the batteries.
