Fine offset HP2550, Руководство по эксплуатации, Страница: 19 / 83

19
Repeat for the additional remote transmitters, verifying each remote is on a
different channel.
5.5.2 Sensor Placement
The best mounting location for the indoor sensor is in a location that never
receives direct sunlight, not even through windows. Also, do not install in a
location where a nearby radiant heat source (radiator, heaters, etc.) will affect
it. Direct sunlight and radiant heat sources will result in inaccurate
temperature readings.
The sensor is meant to provide indoor conditions for display on the console,
but if you would rather have a second source for outdoor conditions instead,
you can mount this unit outside. Recommend to mount the unit under cover
(eve or awning or similar).
To mount or hang the unit on a wall or wood beam:

Use a screw or nail to affix the remote sensor to the wall, as shown on the
left side of Figure 1, or

Hang the remote sensor using a string, as shown in right side of Figure 1
Figure 15: Indoor sensor mounting
Note: Make sure the sensor is mounted vertically and not lying down on a
flat surface. This will insure optimum reception.