10
6.
Wi-Fi Configure with gateway
This Particle Detection Sensor doesn’t has a display
function and you need to use our WS View App to view
the data on your mobile application after pairing this
device with our GW1000 Wi-Fi Gateway or
HP2551/HP3500/HP3501/WH0295 console (all sold
separately).
6.1 Pair with Gateway
If GW1000 has been in operation, and you have never
had any WH45 sensor setup before, just power up the
sensor and GW1000 will pick sensor data automatically.
If a WH45 sensor has been hooked on GW1000 before,
and you have a new sensor to replace the old one, just
power off the old sensor and power on the new sensor,
open the APP: WS View, tap the device and go to sensor
ID page, locate the WH45 sensor, select “Register”, then
the gateway will erase the previous registered sensor and
have the new sensor paired.
