Fine Offset Electronics WH2950, Руководство по эксплуатации, Страница: 17 / 58

17
and within 100m of the console. If the weather station is too close or too far away,
it will not receive a proper signal.
1.
Insert the power adapter into the power jack of the console, and plug in the
adapter. The LCD display will beep once and then light up. The unit will show
software version number 2 seconds after power reset.
Then the unit will turn on all segments of the LCD for 3 seconds, the unit will start
to register the outdoor channel for 3 minutes.
After initialization, the console will instantly display indoor temperature, humidity,
barometer, tendency, date and time. The wind speed, wind direction, rain, and
outdoor temperature and humidity will update on the display within a few minutes.
The remote search icon will turn on
：
Do not touch any buttons until the remote sensor reports in, otherwise the
remote sensor search mode will be terminated and the search icon will turn off.
When the remote sensor data has been received, the console will automatically
switch to the normal mode, and all further settings can be performed.
If it does not update, please reference the troubleshooting guide in Section 11.