7
5.1 Quick Display Mode
- While in Normal Mode, press the
SET
key to enter the Quick Display Mode as follow:
1. Outdoor Temperature / Wind chill / Dew point (press the
+
key or
MIN/MAX
key shifts the display
between outdoor temperature, wind chill and dew point)
2. Absolute pressure / Relative pressure (press the
+
key or
MIN/MAX
key shifts the display between the
absolute pressure and relative pressure)
3. Wind speed / Gust speed (press the
+
key or
MIN/MAX
key shifts the display between the wind speed
and gust speed)
4. 1 hour/ 24 hour / week/ month / total rainfall quantity (press the
+
key or
MIN/MAX
key shifts the display
between the selectable rainfall quantities), while display the rainfall total quantity, pressing the
SET
key
for 2s will reset the rainfall total value to zero and the time recording to current time
.
- Press the
SET
key to accept the change and advance to the next display mode. Continue to press the
SET
key to toggle through the display mode until return to the normal Mode
5.2 Setting Modes
-
Press
the
SET
key for 3 second while in normal mode to enter the normal Setting mode
-
Press
the
SET
key to select the following setting in sequence :
1. Time Zone Setting
2. DST on/off
3. 12/24 hour format
4. Manual time setting (hours/minutes)
5. Calendar setting(year/month /date)
6. Temperature display unit degree Celsius or Fahrenheit
7. Air pressure display units in hPa or inHg
8. Relative pressure setting from 27.13inHg – 31.89inHg (default 29.93inHg)
9. Pressure threshold setting (default 3)
10. Storm threshold setting (default 5)
11. Wind speed and gust display units in km/h, mph, m/s, knots, bft
12. Rainfall display units in mm or inch
-
In the setting modes, press
+
key or
MIN/MAX
key change or scrolls the value. Holding the
+
key or
MIN/MAX
key for 3 second will increase/decrease digits in great steps.
-
Press
HISTORY
key or key idle 30 second, the setting mode will return to Normal Mode
Note:
Please set the units firstly before change units’ value. During change of units setting, units’ value will
change according to new units but it might cause resolution loss due to its internal calculation algorithm.
Note:
“DST OFF” indicates that the feature is off and the internal real time clock will not change times
automatically. “DST ON” indicates that the feature is on and the internal real time clock will change times
according to the DST time schedule automatically. Some locations (Arizona and parts of Indiana) do not
follow Daylight Saving Time, and should select “DST OFF”.
5.3 History Modes
-
While in Normal Mode, press the
HISTORY
key to enter the History Mode.
-
In the History Mode, press the
+
key to select the record over the past 24hours at increments of -3 hours,
-6 hours, -9 hours, -12 hours, -15 hours, -18 hours, -21 hours, -24 hours
-
Press the
HISTORY
key or key idle 30 second to return to Normal Mode
5.4 Alarm Modes
- While in Normal Mode press the
ALARM
key to enter the High Alarm Mode
- Press the
ALARM
key again to enter Low Alarm mode
Remark
: after the initial pressing of
ALARM
key, the display will be refreshed to show current high, low alarm
values. Normal alarm value will be displayed only for those already activated, all other not activated
values will be displayed with “- - -“or “- -“instead.
- Press the
ALARM
key again to return the Normal Mode
- In the High Alarm Mode press the
SET
key to select the following alarm modes: