4.Test the static shock function
•Take out the test bulb from the package and wind its metal wire on the Receiver collar’s
contact points.
• Pressing the Mode button switch to Shock mode, confirm LCD display not to be 0 , and
then press the UP/DOWN button to adjust the intensity level.
• Press the Y button and the test bulb will flash, that means Shock function works.
5.Test the vibration function
•Press Mode button of controller, switch to Vibrate Mode, confirm LCD display not to be 0,
and then press the UP/DOWN button to adjust the intensity level.
•Press Y button, Receiver collar will vibrate, that means Vibration function works.
6.Test the beep function
•Press Mode button of Controller, switch to Beep Mode.
•Press the Y button and receive collar will beep, that mean Beep Function works.
7.Test the LED Light function
•Press Mode button of Controller, switch to Beep Mode.
•Press the Y button and then the receiver collar will flash, signifying that the LED Light
function works.
◎
After indicating that the Controller has been synced successfully with the
receiver collar. To sync the remote with another receiver collar, simply repeat the
previous steps.
Thread the collar strap through the slots on the receiver.
