FINAL SOUND FVSS-201/P DVD RECEIVER USER MANUAL vs. 1.4
14
Step 4: Video connection to TV (or projector)
Connect Final Sound DVD receiver to the TV's VIDEO INPUT
If your TV does have HDMI, connect HDMI cable (not supplied) to the Final Sound DVD
receiver’s HDMI-out jack and to the corresponding HDMI-in jack on the TV.
Or- if your TV has Component INPUT jacks (Y, Pb, Pr) connect the corresponding cables
(either bundled or three separate video grade cables—yellow) to the Final Sound DVD
receiver’s
VIDEO OUTPUT COMPONENT Y, Pb, Pr
jacks and to the corresponding INPUT
jacks on the TV.
Or- if your TV doesn’t have Component, but has S-Video, connect S-Video cable (not
supplied) to the Final Sound DVD receiver’s
VIDEO OUTPUT S-VIDEO
jack and to the
corresponding
S-VIDEO
jack on the TV.
Or- if your TV does have SCART, connect a SCART cable (not supplied) to the Final Sound
DVD receiver’s SCART output jack and to the corresponding SCART input jack on the TV.
(The US-model does not have a SCART connector)
Or- if your TV doesn’t have Component or S-Video, connect the TV’s
VIDEO INPUT
(yellow)
to the Final Sound DVD receiver’s
COMPOSITE
jack (yellow).
If your TV (or projector) supports
progressive scanning
technology (see the TV or projector’s
owner manual if you don’t know whether your device supports progressive scanning), only the
Final Sound DVD receiver’s component outputs and HDMI outputs supports progressive
scanning technology. Also, put the progressive scan switch (backpanel) in the ´on´ position. If
in doubt, leave the progressive scan switch (back panel) in the ´off´ position.
Notes:
Until recently, TVs only had INPUT video jacks. Therefore, your TV might not carry the "IN" or "INPUT" label even though
it is an input.
Step 5: Connect the loudspeakers and subwoofer
Connect the SPEAKERS OUT R red and black terminals to the right loudspeaker’s red
and black terminals respectively.
Connect the SPEAKERS OUT L red and black terminals to the left loudspeaker’s red and
black terminals respectively.
Connect the Final electrostatic loudspeakers to the mains, using the supplied power
adapter (in the loudspeaker’s package) OR:
Connect both Final electrostatic panels to the receiver’s SPEAKER POWER outlets.
Connect the Final subwoofer’s LINE-IN terminal to the DVD receiver’s SUB-out terminal.
If you connect an aditional second subwoofer, you can connect the first sub’s LINE OUT
terminal to the second sub’s LINE IN terminal (daisy chain).
