3. Before adjusting the balance, please confirm that the Mi Smartphone Gimbal is turned off; make the Mi
Smartphone Gimbal placed horizontally as the picture below, keep the gimbal upright and steady, if the
phone can maintain the level independently, representing the balance is appropriate
If the phone is tilted, loosen the balance adjustment knob
according to the mark, and stretch or push the balance
arm in the opposite direction of the tilt direction properly
until the balance arm reaches a horizontal state and then
tighten the knob.
Note:
1. It is not recommended to turn on the Mi Smartphone Gimbal without installing the phone. If the device is
not detected, the Mi Smartphone Gimbal will not work.
2. After installing the phone, please adjust balance in the state that the Mi Smartphone Gimbal is turned off
and stable to make the phone maintain level on its own.
3. Before starting the Mi Smartphone Gimbal, please make sure that the balance has been adjusted after the
installation of the phone, the phone holder fixing knob and the balance adjusting knob are in locked state,
otherwise, the working performance of the gimbal will be affected.
1
2
Balance arm