Fimer VSN700, Руководство по эксплуатации продукта

Страница: 4 / 29

EN
4
Operators are required to read this manual and scrupulously follow the indications reported in it, since FIMER cannot be held responsible
for damages caused to people and/or things, or the equipment, if the warranty conditions are not observed.
ATTENTION – A This manual contains important safety instructions that must be followed during installation and maintenance of
the equipment.
ATTENTION – A This manual must be considered as an integral part of the equipment, and must be available at all times to everyone
who interacts with the equipment.
1. Labels and Symbols
In the manual, the danger or hazard zones are indicated with signs, labels, symbols, or icons.
In the manual and/or in some cases on the equipment, the danger or hazard zones are indicated with signs, labels,
symbols or icons.
Generic hazard - Important safety information. This points out operations or situations in which staff must be
very careful.
Hazardous voltage - This points out operations or situations in which staff must be very careful due to
hazardous voltage.
Positive pole and negative pole of the input voltage (DC)
This points out that it is mandatory to carry out the described operations using the clothing and/or personal
protective equipment provided by the employer.
This points out that the examined area must not be entered or that the described operation must not be carried
out.
NOTE –
D
The choice of the inverter model must be made by a qualified technician who knows about the installation conditions, the
devices that will be installed outside the inverter and possible integration with an existing system.
2. Not included in the supply
FIMER accepts NO liability for failure to comply with the instructions for correct installation and will not be held responsible for systems
upstream or downstream the equipment it has supplied. It is absolutely forbidden to modify the equipment. Any modification, manipulation,
or alteration not expressly agreed with the manufacturer, concerning either hardware or software, shall result in the immediate cancellation
of the warranty.
The Customer is fully liable for any modifications made to the system.
Given the countless array of system configurations and installation environments possible, it is essential to check the following: sufficient
space suitable for housing the equipment; airborne noise produced depending on the environment; potential flammability hazards.
FIMER will NOT be held liable for defects or malfunctions arising from: improper use of the equipment; deterioration resulting from
transportation or particular environmental conditions; performing maintenance incorrectly or not at all; tampering or unsafe repairs; use
or installation by unqualified persons.
FIMER will NOT be held responsible for the disposal of: displays, cables, batteries, accumulators etc. The Customer shall therefore
arrange for the disposal of substances potentially harmful to the environment in accordance with the legislation in force in the country of
installation.
3. Field of use, general conditions
FIMER shall not be liable for any damages whatsoever that may result from incorrect or careless operations.
You may not use the equipment for a use that does not conform to that provided for in the field of use. The equipment MUST NOT be used
by inexperienced staff, or even experienced staff if carrying out operations on the equipment that fail to comply with the indications in this
manual and enclosed documentation.
3.1 Intended or allowed use
This device is monitoring equipment designed for data collection and low-voltage connection to inverters, weather stations, string
combiners, and other photovoltaic equipment.