2
1. Labels and Symbols
The labels on the inverter show the markings, main technical data and the
identification of the equipment and of the manufacturer.
All material used and finished product, must meet the requirements of the current RoHS Directive
Title
Modified
Issued
Design approved
Elec. Eng. approved
Mfg. approved
Drawing No.
Sheet
Dim. in mm
Scale
Size
Revision
A4
© Copyright 2020 Power-One Italy Spa. All rights reserved. Reproduction, use or disclosure to third parties without express written authority is strictly forbidden.
Regulatory Label of REACT2-BATT
XLP.V3804.3AL
F.Falzarano
F.Del Francia
05/10/2020
G.Fiesoli
05/10/2020
05/10/2020
05/10/2020
C.Granci
AA
1/1
1:1
LABEL MATERIAL:
Refer to XLP.V3806.0 for details
LABEL CONTENT:
Fixed as shown in the picture
SIZE:
175 mm (height) x 75 mm (width)
Pantone
Process Yellow C
Process Cyan C
MODEL:
REACT BATT
2-
BATTERY UNIT
I
dc max (charge)
4.5 A
Contains Rechargeable Li-ion Battery
- Refer to instruction manual for proper installation.
- Do not remove the cover. No user serviceable parts inside.
- Do not expose the unit to heating sources.
- Do not expose the unit to direct solar irradiation.
-
s.
Do not install or operate the unit in potentially explosive
atmosphere
WARNING!
IP54
-20
55
(*)
to +
°C
-4
31
(*)
to +1
°F
V
dc max
575 V
W
hr
4.0 kWh
I
dc max (discharge)
5.6 A
V
dc operating range
170 - 575 V
(*): Out of 0 to +40 °C (+32 to +104 °F) temperature range, power derating occurs
PROTECTIVE CLASS: I
Made in Italy
A
B
A)
Inverter/battery model
B)
Main technical data
ATTENTION –
A
The labels attached to the equipment must NOT be
removed, damaged, dirtied, hidden,etc...
In the manual, and/or in some cases on the equipment, the danger or
attention zones are indicated by signs, labels, symbols or icons.
Symbols used in the guide and on the products
Always refer to instruction manual
General warning - Important safety
information
Hazardous voltage
Hot surfaces
Temperature range
Positive and negative pole of the input voltage (DC)
Always use safety clothing and/or personal safety devices
Point of connection for grounding protection
2. Equipment Models and Components
The model of equipment to which this guide refers is REACT2-BATT.
The principal components of the REACT2-BATT are shown in the figure
and described in the following table:
COMM.
[B]
POWER
[B]
COMM.
[A]
POWER
[A]
22
23
09
08
24
26
25
20
21
26
COMM.
[B]
POWER
[B]
COMM.
[A]
POWER
[A]
22
23
09
08
24
26
25
20
21
26
Main components
08
Battery communication connector COMM.[A]
09
Battery power connector POWER [A]
20
REACT2-BATT wall bracket
21
REACT2-BATT
22
Battery communication connector COMM.[B]
23
Battery power connector POWER [B]
24
REACT2-BATT external protective earth [B]
25
REACT2-BATT external protective earth [A]
26
REACT2-BATT wall attachment point
