Fimer PVS-10-TL, Руководство по эксплуатации продукта, Страница: 37 / 80

EN
37
• Lift the inverter up to the bracket (05) (using the handles
(25) or M8 eyebolts) and insert the two sides anchor points
(placed on sides of the wall bracket) into the two slots on the
inverter. Check that the anchor points has been correctly inserted
in the slots before releasing the inverter.
ATTENTION –
A Risk of injury due to the heavy weight of
the equipment. Always consider the center of gravity of the
enclosures while lifting.
• Remove the handles (25) or eyebolts and tighten the supplied
two side bracket screws (18) (see paragraph “3.5.2 Tightening
torques”) to avoid the tilting of the bottom part of the inverter.
18
• A padlock can be installed to lock the inverter to the bracket so
that it cannot be disassembled by outsiders.
• Remove the protective cover from the connector of the
Wi-Fi antenna located on the bottom side of the inverter.
Install the Wi-Fi antenna by screwing it into the specific connector
(14) .