Fimco Volt Edge 5164281 Скачать руководство пользователя страница 3

Page 3 

 

Problem

Possible Cause

Possible Solution

Charger not 

plugged in

Plug charger into a working outlet.
Check outlet with another device.

Temperature is 

too hot or

too cold

Move charger and battery to a climate-controlled 
environment and wait for the product to reach 
room temperature.

Battery pack not 

inserted into 

charger

Remove battery pack and re-install battery pack. 
Ensure the bottom edge of the battery is seated 
first, then push the clips in.

TROUBLESHOOTING

Battery will 

not charge

Important charging notes:

 

 

1. 

Longest life and best performance can be obtained if the battery pack is charged with the air temperature is between 50°F (10°C) and  

80°F (26°C). 

2. 

The charger and battery pack may become warm to the touch while charging. This is normal and does not indicate a problem. Ensure the 

vents are not blocked to allow cooling. 

3. 

The battery pack should be recharged when it no longer powers the equipment. Do not continue to attempt using the battery if low power 

is indicated. You may recharge a partially discharged battery pack without damaging the battery pack. 

4. 

Do not freeze or submerge the charger in water or any other liquid. 

 

Warning:

 

Shock Hazard. Do not allow any liquid to get inside the charger. Never attempt to open the battery pack for any reason. If the plastic 

housing of the battery pack breaks for cracks, return to a recycling center and replace the charger. 

Содержание Volt Edge 5164281

Страница 1: ...an be shorted by foreign material Foreign mate rials of a conductive nature such as but not limited to steel wool aluminum foil or any buildup of metallic particles should be kept away from charger cavities Always unplug the charger from the power source when there is no battery pack in the cavity Unplug charger before attempting to clean Warning Do not attempt to charge the battery pack with any ...

Страница 2: ...ice complies with NRCAN EEV CSA C381 2 17 May 2017 and Canada s Energy Efficiency Regulations This device complies with cETLus certification based on Conforms to UL STD 1310 Certified to CSA STD CC22 NO 223 Storage Recommendations The best storage place is one that is cool and dry away from direct sunlight and excess heat or cold Long storage will not harm the battery pack or charger Do not store ...

Страница 3: ... is charged with the air temperature is between 50 F 10 C and 80 F 26 C 2 The charger and battery pack may become warm to the touch while charging This is normal and does not indicate a problem Ensure the vents are not blocked to allow cooling 3 The battery pack should be recharged when it no longer powers the equipment Do not continue to attempt using the battery if low power is indicated You may...

Страница 4: ...anty you must 1 provide written notice to Fimco of the defect during the Warranty Period and within thirty 30 days after the defect becomes apparent or the repair becomes necessary at the following address Fimco 1000 FImco Lane North Sioux City SD 57049 and 2 make the Equipment available to Fimco or an authorized dealer within a reasonable period of time For more information about this Limited War...

Отзывы: