Rubber cover
Indicator Light
Charging receptacle
With valve Off push
tab and remove hose
3
1
2
The Removable Nozzle Assembly can be installed on the
Removable Wand to spray closer to the desired location.
The Removable Nozzle Assembly can be installed directly
on the Handgun for more compact spraying.
Note
: The battery is hardwired into the handgun. In the
event the battery no longer holds a charge, purchase
handgun #5163127.
Page 3
Handgun Charging
Follow the 'After Spraying' & 'Winter Storage' instructions to
1.
clean the tank and handgun plumbing.
Turn Shut Off Valve to the Off position.
2.
Disconnect hose from handgun by pressing the release
3.
button.
Pump remaining clean water out of handgun.
4.
Lightly pull and rotate the rubber cover, revealing the
5.
charging jack and charging indicator light. This is located at
the base of the handgun.
Plug the charger into a 110 Volt AC electrical receptacle.
6.
Insert the male charging plug into the female jack at the
7.
base of the spray wand. The light will turn red, indicating
charging has begun.
(If the red light blinks an incorrect
voltage charger is being used. Disconnect the charger
immediately.)
The light will turn green when charging is complete.
8.
Disconnect the plug from the handgun and the charger from
the electrical receptacle.
Rotate and re-plug in the rubber cover over the charging
9.
jack. This will prevent dirt or dust from getting inside the
receptacle.
Handgun Wand and Nozzle Options
Off Position
On Position
Item No Part Number QTY.
Description
1
5100819
1
REMOVABLE WAND
2
5163127
1
HANDGUN 3.6V LITHIUM GEAR PUMP
3
5278244
1
REMOVABLE NOZZLE ASSEMBLY
