Page 3
Spray Wand (5163100)
1. Unscrew the standard (poly) adjustable tip (5018330) from the barrel of the spray
wand assembly. Be careful as you are doing this, as the barrel is aluminum and can
be easily marred or damaged, if handled roughly.
2. Using a tip of your choice (EX.: TP8002VP, TP8004VP, etc.), place the tip inside the
cap (5046126) and thread the cap onto the end. Tighten snugly, do not over-tighten.
The tip can be rotated at a certain ‘angle’ prior to tightening the cap down, if so
desired for either horizontal or vertical fan sprays.
Changing from a ‘Cone’ shaped spray pattern to a ‘Fan’ shaped spray pattern
(Standard) ‘Cone-Shape’
Spray Pattern
‘Fan-Shape’ Spray Patterns
Horizontal
Vertical
‘Stan
dard’
Spra
y Wan
d Set
up
‘Modi
fied’
Spra
y Wan
d Set
up
Adjustable Tip
(Cone Pattern)
Fixed Tip
(Fan Pattern)
DETAIL
Fan Tip
Install
