Fimco 5302930, Руководство пользователя

Страница: 6 / 14

Page 6
*** The Sprayer should now be ready for use ***
Attach the boom to the boom mount brackets with the
(2) u-bolts and (4) whiz locknuts. Make sure the u-bolts
are positioned within the grooves of the grommets on
the boom tube
NOTE: The purpose of these grommets is to prevent
metal-to-metal contact between the u-bolts, boom
tube and boom mounting brackets.
The grommets will ‘compress’ as you tighten the whiz
locknuts onto the u-bolts. Tighten just so that the boom
tube will NOT rotate within the grommets. Alternate the
tightening of the locknuts to provide even pressure on
the grommet.
**DO NOT OVER TIGHTEN the whiz locknuts, as this
may cause the boom tube to flatten slightly!
After your boom is attached, connect the feeder hose,
using (1) hose clamp.
Place the hose clamp loosely over the end of the hose.
Slip the end of the hose over the hose barb on the cen-
ter nozzle. Use a twisting motion, if necessary, to get
the hose fully onto the barb. Bring the hose clamp to the
connection point and tighten securely.
Step 8
Step 9