connect the power
The jug and the host is not
assembled right(the jug not in the
correct place)
Put the jug on the right
place(host)
The indicator light is
on, but it doesn’t
work
You don’t press the switch
Choose the function and press
the switchc
No water in the jug or add
too much water or too little water
Put the water between the
upper and lower water level
A reminder call was made during
work
Unplug the power and then
connect again , follow the
right steps to get the job done
Key no response
Short interval for Power cuts,
system doesn’t reset
Short electricity for 3 minutes
and the connect the power to
use
No water in the jug or add
too little water
Put the water between the
upper and
lower water levelt
The products have been
executed program
Normal phenomenon
Ingredients are
not broken
Add too much water or too little
water
Put the water between the
upper and
lower water level
The power voltage is too low
Use household stabilizer
Too much food or too little food
Please follow the recipe
Spill
Add too much water or too much
food
Please refer to the recipe
before you use the blender
ER1
Too much electricity, or the food lad
is too heavy
Please follow the recipe
Hazardous constituent and chart
