Fimap FS50 B-BT, Руководство по эксплуатации и обслуживанию

Страница: 13 / 24

13
WORK
For suction efficiency, clean the filter approx. every 10 min. Proceed as follows:

close the suction (lever a);

activate the manual filter shaker repeatedly (lever b);

for the version with electric filter shaker, pull the lever (a) for a few seconds at the end of run

reopen suction and start work again.
Close the suction (lever a.) when working on wet or damp surfaces (for the version with electric filter
shaker, pull the lever without activating the motor itself).
Periodically check the filling of the tray by pulling it out of the machine after having released the hooks,
and if necessary empty it. Bear in mind that the weight of the dirt collected is proportional to the specific
weight of the material brushed up.
ATTENTION: These operations must be carried out using gloves to protect the
hands.
ATTENTION: Beware of the possible combinations of hazardous dusts that
could trigger an explosion or fire.
ATTENTION: Be careful to follow the regulations regarding the disposal of
hazardous dusts.
4. SIDE BRUSH
Use the side brush in a limited manner on the edges, as it is not assisted by the suction.
To use the side brush, simply release the lever (c) from its housing and push it upward.
To raise the side brush, simply push the lever (c) downwards and insert it into the idle position.