4
On consignment of the machine
When the machine is consigned to the customer, an immediate check
must be performed to ensure all the material mentioned in the shipping
documents has been received, and also to check the machine has not
suffered damage during transportation. If this is the case, the carrier
must ascertain the extent of the damage at once, informing our
customer service office. It is only by prompt action of this type that the
missing material can be obtained, and compensation for damage
successfully claimed.
Introductory comment
FM1500 S and FM1500 V machines are built for the professional
cleaning of hard and vinyl floors for indoor surfaces, to be carried out by
following the instructions. Any use of the machine for other purposes is
dangerous and therefore prohibited. The machine is suitable for
collective use, for example in hotels, schools, hospitals, factories, shops,
offices and condominiums.
The machine must be used only for this purpose.
Even the best machines will only work well if used correctly and kept in
good working order. This brochure offers you all the information
necessary to use in a regular, safe and suitable manner the models of
the "FIMAP Single-Brush" machines, and it must always be made
available to the user. We therefore suggest you read this instruction
booklet carefully and read it again whenever difficulties arise while using
the machine If necessary, remember that our customer assistance
service (organised in collaboration with our dealers) is always available
for advice or direct intervention.
Intended use
The scrubbing machine is designed exclusively for the professional
cleaning of surfaces and floors in industrial, commercial and public
environments. The machine is only suitable for use in closed - or at least
covered - locations. The machine is not suitable for use in the rain, or
under water jets. It is FORBIDDEN to use the machine for picking up
dangerous dusts or inflammable liquids in places with a potentially
explosive atmosphere. In addition, it is not suitable as a means of
transport for people or objects.
Serial number plate
TECHNICAL DESCRIPTION
UM
FM1500 S
FM1500 V
Working width
mm
510
510
Disc brushes
∅
mm
- -
Brush rotations
rpm
1500
1500
Brush motor power
W
1100
1100
Brush motor voltage
V
230
230
Brush motor frequency
Hz
50
50
Maximum gradient with full load
%
2
2
Solution tank capacity (optional)
l
-
-
Rear wheel diameter
mm
100
100
Machine length
mm
610
610
Machine height at motor
mm
300
300
Machine height at shaft
mm
1260
1260
Machine width
mm 545 545
Machine service weight (without solution tank)
kg
43
43
Length of power supply cable
m
15
15
Noise level (in compliance with IEC 704/1)
dB (A)
-
-
Hand vibration level
m/s
2
- -
Body vibration level
m/s
2
- -
