Page 6
Translation of the original instructions, SilentCare room air filter, Filtration Group GmbH, 01.02.21, Mat. No. 72488984, Version 01
10
Start-up / normal mode
WARNING!
•
Disconnect the mains plug while working
on the equipment!
1.)
Connect the plug to the mains.
The system is now ready for operation.
2.)
Press the on / off switch (green lamp).
The system starts up.
3.)
Set the power level switch to I or II.
Level 1 (I): Normal mode (600 m
3
/h)
Level 2 (II): Booster mode (900 m
3
/h)
Level 2 should only be selected in noise-
insensitive locations or only for short periods!
The system operates at higher output
(booster mode) when level 2 is selected.
The noise level is also higher
(approx. 52 dB(A)).
Operating the device at higher output
can shorten the service life of the filter
element.
11
Replacing the filter element
DANGER!
Danger of electric shock when replacing
the filter element!
•
Disconnect the equipment from the
power supply.
DANGER!
Danger when the fan is working!
•
Disconnect the equipment from the
power supply prior to replacing the filter
element!
WARNING!
Danger if pollutants are inhaled!
•
Wear a suitable face mask!
WARNING!
Danger of crushing!
•
Be careful not to trap parts of the body between the
filter and the housing while installing the filter element!
Two people are recommended to replace
the filter element.
The filter element can also be replaced by
the manufacturer. Please contact the
manufacturer for more information.
Contact the manufacturer of the room air
filter in case of severe fouling or damage!
1.)
Unpack the spare filter element and place it ready.
Keep the packaging at hand for the used filter
element.