Page 6
Translation of the original instructions
Dust Removal Filter, Filtration Group GmbH, 25.01.18, Mat. No. 79340811, Version 12
7
Technical data
7.1
General data (excluding options)
7.1.1 Dust filter housing (standard version)
Material: ......................................... Stainless steel 1.4301
Seals: ......................................................................... NBR
Clamp rings: .................................. Galvanized sheet steel
Max. operating temperature
(without sound absorbing cover): ............................ 120°C
Max. operating temperature
(with sound absorbing cover): ................................... 40°C
Pressure resistance: ....................................... +/- 50 mbar
The values for the standard version apply
unless otherwise indicated in the contract
documentation.
Other materials and temperatures are
available as special versions.
7.1.2 Cartridges
Filter material: .... Refer to order-specific list of spare parts
Seal material: ................................... PES needle felt
Metal parts: ....... Galvanized sheet steel/1.4301 (optional)
Refer to the contract documentation
(offer/order confirmation) and/or the cartridge
data sheet for more technical data.
7.2
Compressed air connection
Compressed air: ................................6 – 7 bar, dewatered
Consumption per cleaning cycle: ................ Approx. 10 l
N
7.3
Noise emission
Continuous sound pressure level: .................... < 70 dB(A)
7.4
Ambient conditions
Ambient temperature: .................................. - 15 ... + 70°C
Floor: ........................................ Level, free from vibrations
Atmosphere: ................................................ Non-corrosive
*
N = Normal conditions (corresponds roughly to the
“suction capacity” of a compressor)
8
Transport and storage
Transport
CAUTION
High centre of gravity!
⇒
Risk of injury to persons or damage to
property
•
Do not transport when assembled!
•
Always transport horizontally
•
Avoid vibrations
•
Do not remove the transport lock until the equipment has
reached its installation location
Fig. 4:
Delivery condition
Fig. 5:
Centre of gravity
Storage
•
Always store in the original packaging
•
Always store in a dry, frost-free room
Seaworthy packaging is specified in the
contract documentation as an option.
Centre of gravity
Transport lock
Cardboard box (e.g.)
SFK 02
SFK 03
