3. DAILY USE
3.1 BUTTON USAGE, CALIBRATION AND MEASUREMENT UNIT CHANGE
Reset the present total (See Fig. 2)
1) When the meter is in standby mode, press the RESET key.
2) The display shows all the segments at once.
3) The meter resets to display “0” on the resettable totalizer.
Show current correction factor and general total (See Fig. 3)
Press MENU and RESET together and hold for two seconds.
Value “1.4000” is the correction factor which can be reset;
“1234567” is the general total which cannot be reset.
Measurement unit change (See Fig. 4)
Press MENU and RESET together and hold for five seconds.
Zone 7 on the display is the current unit. Press RESET to chose a different measurement unit and then
press MENU to confirm.
3.2 RESET THE RESETTABLE TOTALIZER (SEE FIG. 5)
When the meter is in standby, press the RESET key for 2 seconds to reset the totalizer.
Fig. 2
Fig. 3
Fig. 4
Fig. 5
mdi - Manufacturers Distributor Inc. | Phone: (813) 241 - 4900 | Fax: (813) 571 - 0422 | www.SoteraSales.com | [email protected]
