Concrete Spraying Machine
– SSB 02.1
4
Safety instruction concerning:
-
Assembly and the installation – Assembly of the machine is carried out at the
producer and the transport to the client is performed in already assembled form
of the machine. The check of the machine integrity, complexity of the
equipment of the machine is performed in the place of operation. Machine is
switch to the electrical supply and to the compressed air supply after setting to
the place of application.
-
Setting to the operation – Machine and its accessories must be appropriately
assembled before setting to the operation. All necessary assembly and
following checking operation steps must be carried out according to the
Operation and Maintenance Manual provided by the producer.
-
Operation of the machine – Machine must be used only in accordance with the
Operation and the Maintenance Manual provided by the machine producer.
Machine is operated by one operator who is responsible for the faultless
conditions of the machine at the same time.
-
Manipulation – machine can be transported by the suitable transport means
defined by the site manager. Total weight of the machine is 950 kg (± 5 %).
Each machine is equipped with catching loops for the connection to lifting
machine. Manipulation must be careful without any dynamic crashes.
-
Assembly and disassembly – Disassembly of the hoses is done in case of each
transfer to the other operation place Transfer of the machine in assembled
mode is done by mechanical transport means (crane truck, truck). It is
necessary so that there is no pressure of the compressed air in the machine as
well as the switch off the electric supply is done before any disassembly of the
machine.
-
Adjustment – It means setting up according to the Operation and the
Maintenance Manual. Simple steps without any influence to the safety of the
equipment must be done by the operators according to the local conditions.
Other procedures must be left to the specialised service according to the
Operation and the Maintenance Manual.
-
Maintenance – small and operational steps are done by the operators according
to the time order in the Operational Manual. Procedures requiring higher
specific knowledge are done by the authorised service agencies for those
machines.
-
Disposal – Disposal of the machine is comprised of decomposition of the
parts to:
- Steel material polluted by the dangerous substances
- Colour metals
- Plastics, rubber and the parts polluted by the dangerous substances
must be disposed off in accordance to the Act about the liquidation of
the dangerous substances
