background image

Fike

®

 is a registered trademark of Fike Corporation. SWIFT® and System Sensor® are registered trademarks of Honeywell International, Inc. 

FCC STATEMENT

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 
(1) This device may not cause harmful interference, and (2) this device must accept any interference 
received, including interference that may cause undesired operation.

NOTE:

 This equipment has been tested and found to comply with the limits for a Class B digital device, 

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against 
harmful interference in a residential installation. This equipment generates, uses and can radiate radio 
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful 
interference to radio communications. However, there is no guarantee that interference will not occur in 
a particular installation. If this equipment does cause harmful interference to radio or television recep-
tion, which can be determined by turning the equipment off and on, the user is encouraged to try to 
correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
–  Connect the equipment into an outlet on a circuit different from that to which the receiver is con-

nected.

– Consult the dealer or an experienced radio/TV technician for help.

LICENSING STATEMENT

Use of these products in combination with 
non-Honeywell products in a wireless 
mesh network, or to access, monitor or 
control devices in a wireless mesh nework 
via the internet or another external wide 
area network, may require a separate 
license from Sipco, LLC. For more infor-
mation, contact Sipco, LLC or Ipco, LLC at 
8215 Roswell Rd., Building 900, Suite 950, 
Atlanta, GA 303350, or at www.sipocollc.
com or www.intusiq.com.

SUPPLEMENTAL INFORMATION

For Limitations of Fire Alarm Systems, 

please go to: 

http://www.systemsensor.com/

en-us/Documents/I56-1558.pdf  

 

Limitations of  

Fire Alarm Systems

  4 

I56-6960-000 

  

©2021. 1/15/2021

Содержание FIK-W-PHOTO

Страница 1: ...not attach the base and detectors to temporary structures such as removable ceiling tiles such that the placement could be altered To prevent I56 6960 000 INSTALLATION AND MAINTENANCE INSTRUCTIONS changes in device placement permanently secure the structure or mount the detector across the ceiling panel support as shown in Figure 2 BATTERY REPLACEMENT Low battery levels on the wireless devices are...

Страница 2: ... sensing chamber Turn until it is firmly in place 7 Replace the cover using the LEDs to align the cover and then gently pushing it until it locks into place Make sure that the thermistors do not become bent under the cover on the FIK W ACCLIMATE model 8 Reinstall the detector 9 Test the detector as described in TESTING 10 Reconnect disabled circuits 11 Notify the proper authorities that the system...

Страница 3: ...VER FIK W PHOTO FIK W ACCLIMATE SENSING CHAMBER COVER AND SCREEN SENSING CHAMBER COVER REMOVAL TABS FIGURE 5 DETECTOR COMPONENTS FIGURE 4 MAGNET TEST MARKERS C0145 02 LED TEST MAGNET POSITION MAGNET TEST MARKER LED 3 I56 6960 000 1 15 2021 ...

Страница 4: ...ion If this equipment does cause harmful interference to radio or television recep tion which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit d...

Отзывы: