Fiilex T360 Series Скачать руководство пользователя страница 5

4

Warranty

Unless otherwise stated, your product is covered by a 

one year parts and labor limited warranty.

 

Fiilex guarantees, to the original buyer,  that this product is to be free of defects in both workman-
ship and material for a period of one year from the date of shipment. This warranty extends to all 
products which have proved defective through normal use but excludes products that have been 
disassembled, modified or misused by the buyer or any other person. This warranty is in lieu of all 
other warranties, and disclaims all warranties expressed or implied, including any warranty of mer-
chantability, fitness for a particular purpose, or arising from the course of dealing between the 
parties or usage of trade. 

Returning an Item Under Warranty for Repair

It is necessary to obtain a Return Authorization Number (RA#) from your dealer/point of purchase 
BEFORE any units are returned for repair.  Fiilex will make the final determination as to whether or 
not the unit is covered by warranty.  Fiilex will replace or repair to proper working condition any 
products that are returned under warranty. Products repaired or replaced under warranty are 
under warranty only for the remaining unexpired period of time of the original warranty.

Any Product unit or part returned to Fiilex must be packaged in a suitable manner to ensure the 
protection of such Product unit or parts. The package must be clearly and prominently marked to 
indicate that the package contains returned product units or parts with a Return Authorization 
(RA#) number. All returned product units or parts must be accompanied by a written explanation of 
the alleged problem or malfunction.

1689 Regatta Blvd. Richmond, CA 94804  
|  (510) 620-5155  |  fiil [email protected]

www.fiilex.com

Safety

• Read all instructions.
• Do NOT install the T360 Series in a damp or wet area.
• Do NOT cut any track sections.
• Do NOT install any part of a track system less than 5 feet above the floor.
• Do NOT install any luminaire assembly closer than 6 inches from any curtain, or similar  

combustible material.

• Disconnect electrical power before adding to or changing the configuration of the track.
• Do NOT attempt to energize anything other than lighting track luminaires on the track. To reduce 

the risk of fire and electric shook, do not attempt to connect power tools, extension cords, 

appliances and the like to the track.

• The light source of this luminaire is not replaceable; when the light source reaches its end of life 

the whole luminaire shall be replaced.

• If neccessary, seek certified electrician for installation assistance.
• Do NOT connect a track to more than one branch circuit unless the track is constructed so that it 

can be used with more than one branch circuit. Check with a qualified electrician. Although the 

track lighting system may seem to operate acceptably, a dangerous overload of the neutral may 

occur and result in a risk of fire.

• FOR USE WITH EUTRAC 233/225 TRACK SYSTEMS ONLY.

Содержание T360 Series






Отзывы: