Fiilex Q8 Travel, Руководство пользователя

Страница: 4 / 6

Rear Panel Interface Operation
3
1. Double click the DMX Address Knob (12) to activate the DMX
Address Section of the LCD Display. Once activated, a blinking line
will appear below the DMX Display Area.
2. Turn the DMX Address Knob (12) until desired address appears.
3. Once desired address is displayed on the screen, click the DMX
Address Knob to set the address. The new selected address will auto-
matically be set after 3 seconds of inactivity.
4. When a DMX address is selected, the Q8 Travel will automatically
assign the next two addresses in the following order:
(1) Intensity (2) CCT (3) Hue
• For adjusting the fixture’s DMX address via RDM, consult operating
instructions for DMX/RDM control systems.
Flashing underscore
Assigning DMX Address:
Knob
CCT
PWR
HUE
DMX
Range
2800K - 6500K
100% - 0.1%
± 0.25 Magenta/Green
1 - 510
Function
Set color temperature
Set intensity
Set HUE value
Set DMX address
Connect AC Power Adapter to AC Cable
(For regions outside of the U.S)
Pull
lock
unlock
AC Cable (Plug head varies by region: EU, UK, AU, ZA, CH)
320W/48V Power Adapter
XLR 3-Pin Connector (DC out)
powerCON TRUE1
P/N: 5048669-001 (female)
5048669-002 (male)
P/N: 5048659-001 (female)