5
4
Setup and Basic Operation
Initial Setup
1. Mount Light Stand Adapter (O) to 5/8” Stud on light stand.
2. Slide Barndoors into Barndoor Brackets (B) until Accessory
Lock (C) clicks.
To release Barndoors, slide back Accessory Lock Release (Q) and
slide Barndoors out of Barndoor Brackets (B).
3. Insert DC power plug from power adapter into DC Power
Input Jack (I).
4. Connect Power Adapter to AC Power.
5. Press On/Off Button (J) to activate light.
Light Settings
Turn CCT Tuning Knob (K) to adjust color temperature
(2800-6500K).
Turn Intensity Knob (G) to adjust light intensity (0-100%).
(Pro Plus only)
Double click CCT / Hue Tuning Knob (K) to
enter hue tuning mode, then turn knob to adjust hue
(±0.25 green). To return to CCT tuning mode, click knob
(K) again or wait 3 seconds.
DMX (Pro / Pro Plus only)
1. Insert phone jack (TRRS) connector into LIght Control
Input / Output Jack (H/L).
2. Double click Intensity / DMX Address Knob (G) to enter
DMX address edit mode, then turn knob to select address.
To return to intensity adjustment mode, click knob (G)
again or wait 3 seconds.
DMX connection requires three-ring TRRS phone jack.
Cable Adapter accessories are available to facilitate DMX
connection via RJ45 and XLR.
