9
Information and Specifications in this document are subject to change without notice. DiCon
Lighting, Inc. assumes no responsibility or liability for any error or inaccuracies that may
appear in this manual. Unlawful reproduction or distribution in any manner without the
written permission of DiCon Lighting, is strictly prohibited.
© DiCon Lighting 1996-2014 All Rights Reserved
Fiilex.com
1689 Regatta Blvd. Richmond, CA 94804
(510)620-5155 . [email protected]
For Your Safety
•
Do not attempt to disassemble the body of the P180E.
•
Do not directly cover the side and/or back air vents.
Allow for proper air flow.
•
Use only included power supply or optional D-Tap Cable.
Failure to do so may cause damage to the LED light.
•
Use only a soft, dry towel to gently clean the exterior of
light when needed.
•
Before powering up for the first time, please remove any
or all protective membranes from the light.
Size (without Barndoor)
2.9” x 2.9” x 3.8” / 74.2 x 74.2 x 98mm
Weight (Includes Yoke)
1.2 lb/527g
LED
Dense Matrix LED
Thermal Design
Advanced Vapor Cooling System
CCT Range
3000-5600K Continuous Tuning
CRI
≥92
Power Consumption
40W Max / Comparable in output to 200W Tungsten
Power Input
12 to 24V DC
AC Adapter
100-240V AC, 50-60Hz (In) / 19V DC, 65W Max (Out)
Operating Temperature
- 30 to 40 °C
Weather Resistance
IP-24 Rating
