10
grille, if you have selected this option. If you have not
selected this option, skip to
Step 5.
The optional lower grille installs using eight pieces of 22
Gage galvanized steel.
4.1) Drill 1/16” holes
, in the locations shown in
Fig. 12
Drill these holes about 1/8” from the edge of the bumper
(see Figure 13) so that the install wires are nearly invisible
when secure. Place the grill against the inside edge of the
bumper and loosely attach each of the eight wires. When all
fasteners are loosely installed, use a pair of pliers to twist
each fully tight.
Figure 12.
Locations to drill holes for lower grille option
