SMART WINDOW /DOOR CONTACT
USER MANUAL
5
4.1.2 CONNECTING A WINDOW/DOOR CONTACT TO YOUR FIFTHPLAY CUBE
A
IMPORTANT: Ensure that the window/door contact is in the immediate vicinity (0.5 to 1 meter)
of the gateway.
You can connect your window/door contact to your fifthplay cube in the following 2 ways:
Via the APP:
1.
Open the fifthplay Home app and log in.
2.
At the top left of the app, click on and select '
CONFIGURATION
'.
3.
Go to '
DEVICES
'.
4.
At the top right, click on
+
.
5.
Select '
SENSOR
' as the type of device.
6.
Select '
WINDOW/DOOR CONTACT
'.
7.
Wait until the gateway is in connection mode (Once the connection mode has been established, you will
see a notification on your screen). If this is not the case, click on '
CANCEL
' and '
TRY AGAIN
'.
Please note: If no
devices to be added are found, the connection mode will automatically be terminated after 2 minutes.
8.
Hold down the programming button (A) of the window/door contact for at least 1 second to connect it to the
gateway. Once the connection has been established, you will see a confirmation message on your screen.
9.
Once the window/door contact has been added, you will see a notification on your screen.
10.
If desired, change the name of the window/door contact.
Via the WEBSITE:
1.
Go to home.fifthplay.com and log in.
2.
Go to '
CONFIGURATION
'.
3.
Go to '
DEVICES
'.
4.
Click on '
ADD A DEVICE
'.
5.
Click on '
ADD A SENSOR
'.
6.
Select '
WINDOW/DOOR CONTACT
' and click on '
NEXT
'.
7.
Wait until the gateway is in connection mode (Once the connection mode has been established, you will
see a notification on your screen). If this is not the case, click on '
CANCEL
' and '
TRY AGAIN
'.
Please note: If no
devices to be added are found, the connection mode will automatically be terminated after 2 minutes.
8.
Hold down the programming button (A) of the window/door contact for at least 1 second to connect it to the
gateway. Once the connection has been established, you will see a confirmation message on your screen.
9.
Once the window/door contact has been added, you will see a notification on your screen.
10.
If desired, change the name of the window/door contact.
