INSTALLATION
3 - 5
SE-42R / SE-42
Infrared light sensor
www.maxcess.eu
MI 1024 1 C
Electrical connection
CAUTION:
The sensor could be damaged.
Ö
Electrical connections should always be made or disconnected
on the sensor while there is no electrical power in the system
Ö
When attaching the connector with the jack on the sensor,
pay close attention to the guide and groove! The connector and
jack must not be connected with incorrect orientation or by
force, as this will destroy the sensor.
The sensor must be connected to the web guide controller
according to the system diagram in the system documentation.
