manualshive.com logo in svg

Fiery ZX-40, Руководство по печати, Страница: 73 / 81

Поделиться
Скачать
Fiery ZX-40 Скачать руководство пользователя страница 73

C

C-3

Troubleshooting

Problems with print quality 

Jobs sent to the parallel port 
do not print.

•

Review the procedures provided in Getting Started on how to prepare the Fiery ZX and 
your Windows 95 computer for parallel port printing.

Also see your Windows 95 documentation.

•

Ask the administrator to increase the parallel “Port Timeout in Seconds” on the Fiery ZX 
Control Panel.

•

Ask the administrator to change the Ignore EOF Character setting on the Fiery ZX 
Control Panel.

If you will be printing ASCII format PostScript only, set 

Ignore EOF Character

 to 

No

; if 

you will be printing Binary format PostScript, set it to 

Yes

.

•

If you print using the DOS copy command, make sure to use the 

/b

 option when 

printing binary files.

•

If the PostScript printer driver that you are using lets you select bidirectional 
communication, make sure that it is disabled. 

This is generally set from the Properties dialog box for the printer. 

If this happens:

Try this:

Print settings for your job 
output do not match the 
settings you gave.

•

Make sure that you did not override the setting for the job in another place.

For information about options and overrides, see Appendix A "Print Options."

If this happens:

Try this:

Содержание ZX-40


















































































Отзывы:

Нет отзывов