A
A-1
Print Options
Print options give you access to the special features of the DocuColor 40 and the
Fiery ZX. Print options can be specified in several places—in Fiery ZX Setup, from the
printing application, from the Fiery Downloader, from the Command WorkStation, or
from the Fiery WebSpooler. The table in this appendix briefly describes each print
option, gives its default setting, and provides information on any constraints or
requirements in effect.
Where to set print options
• Some settings are specified during Setup by the administrator. For information on
the current default settings, check with the operator or the administrator.
• From applications
With the Adobe PostScript printer drivers (included in your user software) and the
Windows NT 4.0 printer driver, you can specify and override job settings when you
print a job. See Chapter 1, “Printing from Windows Computers” and Chapter 2,
“Printing from Mac OS Computers” for information about specifying job settings
from applications.
N
OTE
:
The job settings you specify can be overridden by the operator from the
Command WorkStation or the Fiery WebSpooler.
• From the Fiery Downloader
Only a few settings—Page Range (for PDF files only), Copies, and Brightness—can
be specified when printing jobs with the Fiery Downloader. To change options in the
Fiery Downloader, select the job in the Files to be Downloaded (Windows) or Files
to Download (Mac OS) list and click Options. For more information, see
Chapter 5, “Downloading Files and Fonts”.
• Overrides from the Command WorkStation and Fiery WebSpooler
To change job settings from the Command WorkStation, double-click a job to
display the Properties dialog box. To change job settings from the Fiery WebSpooler,
double-click a job to display the Override Print Settings dialog box. For more
information, see the Job Management Guide.
Appendix A:
Print Options
Содержание ZX-40
Страница 1: ...P r i n t i n g G u i d e F IER Y ZX 40 ...
