manualshive.com logo in svg

FieldServer Gamewell FS-8700-83, Руководство пользователя

Поделиться
Скачать
FieldServer Gamewell FS-8700-83 Скачать руководство пользователя страница 19

FS-8700-83 Gamewell 

 

 

 

 

 

 

 

 

Page 17 of 24 

FieldServer Technologies

 1991 Tarob Court Milpitas, California 95035 USA  

Web

:www.fieldserver.com 

Tel

: (408) 262-2299   

Fax

: (408) 262-9042   

Toll_Free

: 888-509-1970   

email

: [email protected]

 

 

Example 2 : Action Numbers 

 

You can have the driver store a value corresponding to the contents of the action field reported in the incoming messages. Actions are brief 
descriptions of the event that caused the message to be generated. A table of values vs. descriptions is provided in section 6.5. The driver stores 
the most recent action number, overwriting the previously stored action numbers. The driver does not keep an event log.  The action number’s are 
set to zero, if the clear_on_reset is set to ‘yes’ and a system reset message is received. 
 
 For example, if the string ‘Fire Alarm in’ is contained in the action field of the message the driver would store an action value of 11.  
 
This map descriptor can be used as well as the any of the map descriptors shown in previous examples. Thus you can have one (or more) map 
descrriptor storing the state and one storing the action number. 

 

Map_Descriptors 
Map_Descriptor_Name, Data_Array_Name  , Data_Array_Offset, Function, node_name, ckt     , Length , Data_Type      , Clear_on_Reset 
Ckt1128_data12     , DA_ACTION128     , 000              , passive , panel1   , 128     , 127    , Action_Numbers , yes

Using this data_Type the 
driver stores a value 
corresponding to the 
contents of the action field 
portion of the message sent 
by the panel. A table in 
section 6.5 provides a list 
of values vs. action 
descriptions. 

Содержание Gamewell FS-8700-83

























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды