background image

2

5

All equipment is potentially hazardous. There is no substitute for a cautious, safe-minded operator who
recognizes potential hazards and follows reasonable safety practices.

When the use of hand tools is required to perform any part of assembly, installation, adjustment, maintaining,
repairing, removal, or moving the implement, be sure the tools used are designed and recommended by the
tool manufacturer for that specific task.

Personal protection equipment including safety glasses, safety shoes, and gloves are recommended during
assembly, installation, operation, adjustment, maintaining, repairing, removal, or moving the implement.

Always use two people to handle heavy, unwieldy components during assembly, installation, removal, or
moving the implement.

Never place any part of your body where it would be in danger if movement should occur during assembly,
installation, operation, maintaining, repairing, removal, or moving the implement.

Never place yourself between the tractor and implement while implement is in operation.

Do not work under a raised implement unless it is securely blocked or held in position.  Do not depend on the
tractor hydraulic system to hold the implement in place.

A heavy load can cause instability of the tractor. Use extreme care during travel. Slow down on turns and
watch out for bumps. The tractor may need front counter-weights to counter-balance the weight of the
implement.

Never use alcoholic beverages or drugs which can hinder alertness or coordination while operating this
equipment.  Consult your doctor about operating this machine while taking prescription medications.

Do not allow others to ride on the tractor with an operator. Riders are subject to injury such as being struck by
foreign objects or being thrown off. Riders obstruct the operator’s view resulting in unsafe operation. Never
allow anyone to ride on the implement!

Before you operate the implement, check over all pins, bolts and connections to be sure all are securely in
place.  Replace any damaged or worn parts immediately.

Do not allow anyone who is not familiar with the safety rules and operation instructions to use this implement.

Never allow children to operate or be around equipment.

Use stabilizer bars, adjustable sway chains, or sway blocks on your tractor lift arms to keep the implement from
swinging side to side.  Adjust as tightly as practical for best performance.

S A F E T Y   I N S T R U C T I O N S  

(continued)

B O X   S C R A P E R

PA RTS LIST

Содержание SBX-4









Отзывы: