Fieldmann FZS 70105-0, Руководство пользователя

Страница: 12 / 20

EN 12
FZS 70105-0
Assembly and operation
Trimming Edges
This grass trimmer can be not only used for trimming grass but also used for cutting the lawn edge. Especially,
when the lawn edge is close to wall, fence, etc.
The edging function of this device is very helpful, to deal with this kind of situation.
To convert to cutting edge function.
(See Fig. 9 & 11)
Depress the edging function convert button, and hold it in
place.
Turn the operating handle by 90°, for changing its
function to edging mode. Then release the edging
function covert button to lock it in place.
Now you have converted the grass trimmer to an edge
trimmer for cutting the lawn edge.
Fig. 11
NOTE: While edging, only allow the tip of the line to make contact with the area being worked. Do not force
the line.
The edging wheel helps to protect the unit and keep the unit from contacting the ground. Take exta caution
while edging as objects can be throw from the trimmer line.
TIPS
For best results, do not cut wet grass because it tends to stick to the cutting head and guard, prevents proper
discharge of grass trimmings, and could cause you to slip and fall.
Pay special attention when performing the work close to trees and bushes. The cutting head could damage
sensitive bark, and damage fence posts.
Use the fl ower protector to avoid cutting device contact with hand objects such as walls and stones.