Fieldmann FZR 5110-B, Руководство пользователя, Страница: 11 / 20

EN
PETROL LAWNMOWER USER'S MANUAL
11 Operation
6. OPERATION
Start/brake lever (fi gure 1 point 2)
– If you wish to start the lawnmower, you need to pull this lever
towards the handle. When the lever is released, the engine will stop.
Starting pull cord (fi gure 1 point 4)
- Serves to start the lawnmower.
Travel lever (fi gure 1 – point 3) -
Serves to start the travel of the lawnmower while mowing.
STARTING THE LAWNMOWER
1. If the engine is not warm, press the fuel primer bulb 2-3 times (fi gure 1 – point 9) (it is not necessary to use
the fuel primer bulb if the engine is warm)
2. Pull the start/brake lever to the handle and pull on the pull cord
3. The engine is turned off by releasing the start/brake lever
Note:
A small amount of smoke may be emitted when the engine is started up for the fi rst time as the
protective layers in the engine are burnt off. This is completely normal and does not constitute a problem.
Pull the start/brake lever towards the handle and quickly pull on the pull cord. Do not allow the pull cord to
wind back.
Caution!
Immediately wipe away any drops of fuel or oil. Do not store or add fuel or handle it in any way
in the vicinity of an open fi re.
CONTROLLING TRAVEL
The travel is controlled using the travel lever (fi gure 1 – point 3). When the lever is pulled to the handle, the
lawnmower will start moving. To stop, release the lever. The lawnmower has one constant speed.
APPLICATION RANGE FOR THE LAWNMOWER
Mowing with loose placement of grass clippings on the lawn - mulching
Mowing with collection of grass clippings in a grass catcher
Mowing with rear discharge of grass clippings
Mowing with side discharge of grass clippings
MULCHING
1. Attach and remove accessories only with the engine turned off.
2. After attaching the mulching accessory, check its stability.
3. Use only original mulching accessories when mulching.
4. Try not to mow tall grass all at once, this will prevent overloading the lawnmower mechanism and the engine.
Assembly
(fi gure 4)
Slide the mulching plug (1) into the discharge chute (2). Secure the seated plug in position using the self-
clamping hook.