Fieldmann FZR 4010-B, Руководство пользователя, Страница: 12 / 20

EN 12
FZR 4010-B
Operation
Recommended maintenance plan
Maintenance interval
Task
After fi rst 2 hours of operation Change the motor oil.
Before each use or daily
Check the oil level in the tank.
Check that the engine turns off 3 seconds after the mowing blade
control lever is released.
Clean grass clippings and other dirt from the bottom part of the
lawnmower.
Before storage
Before repairs or storage for the winter season, drain the petrol from the
tank (see the respective chapter in the manual).
Yearly
Replace the air fi lter (in dusty conditions, replace the fi lter more
frequently).
Change the motor oil.
Lubricate the wheel mechanism.
Replace the mowing blade or have it sharpened (if the blade is blunted
faster, have it sharpened more frequently).
You can fi nd further information in the user's manual of the
lawnmower's engine.
Important:
You can fi nd further information in the user's manual of the lawnmower's engine.
Preparing for maintenance
1. Turn off the engine and wait until the moving parts come to a complete stop.
2. Before starting maintenance, disconnect the end of the spark plug and hook it on to the holding pin (fi gure
14).
3. After fi nishing maintenance, reconnect the end to the spark plug.
Important:
In order to tilt the lawnmower to change oil or replace the blades, fi rst use up all the fuel in the
tank. If it is necessary to tilt the lawnmower before fuel is used up, pump out the fuel using a manual fuel
pump. Always tilt the lawnmower to the side so that the air fi lter is pointing upwards.
Caution!
Fuel may leak out when the lawnmower is tilted. Fuel is fl ammable and combustible and may
cause injury. Use up the fuel during operation or pump it out using a manual pump, never using a siphon
tube.
Replacing the air fi lter
Replace the air fi lter once per year. If you operate the lawnmower in dusty conditions, replace the fi lter more
frequently.
1. See chapter Preparing for maintenance.
2. Take off the air fi lter cover.
3. Replace the air fi lter.
4. Reattach the lawnmower cover.