Fieldmann FZR 3004-B, Руководство пользователя, Страница: 8 / 17

EN
Lawnmower assembly | Putting into operation
9
4. LAWNMOWER ASSEMBLY
The lawnmower is supplied disassembled. The complete adjustable handle and collection box must be assem-
bled before starting work. Proceed step by step according to the user‘s manual and use the pictures as a guide
so that the assembly process is as easy as possible.
m
ATTENTION: Do not use any additional equipment, which was not recommended by the manufacturer.
SET UP YOUR LAWNMOWER
(see pic. 2)
m
IMPORTANT: Unfold handle carefully so as not to pinch or damage control cables.
1. Raise handles until lower handle section locks into place in mowing position.
2. Remove protective padding, raise upper handle section into place on lower handle and tighten both han-
dle knobs.
3. Remove handle padding holding operator presence control bar to upper handle.
WHEEL ASSEMBLY
(see pic. 3)
Assemble the wheels on the mower as in the pictures.
Make sure that the star nut strong enough.
Instruction for plastic catcher assembly (see pic. 4)
1. Take plastic catcher out of the package.
2. Take the small cover part from packing bag.
3. Press the cover part into catcher as picture shown
4. Fix the plastic jacket in the metal bracket.
5. PUTTING INTO OPERATION
Your new lawn mower has been assembled and tested at the factory.
m
ATTENTION: This lawn mower is shipped WITHOUT OIL OR GASOLINE in the engine.
OPERATION
Brake lever –must be held down to the handle to start the engine. Release to stop the engine.
Starter handle - used for starting engine.
Drive control lever (self-propelled lawnmower)- used to engage power-propelled forward motion of lawn mower.
Range of application
Cutting the grass
(see pic. 5)
Cutting up and depositing the grass on the lawn
Cutting up and collected in the grass catcher
Cutting up and ejecting backwards
Cutting up and ejecting sidewards.
SELF-PROPELLED LAWN MOWER USER‘S MANUA
FZR 3003-B navodA5_14.indd 9 10.1.12 11:36