Fieldmann FZN 1001-A, Руководство пользователя

Страница: 10 / 108

FZN 1001-A
10 EN Putting into operation
approximately 18-24.
- if charging problems persist, take or send the tool , battery pack and charger to your local
service center.
The battery pack should be recharged when it fails to produce sufficient power on jobs
which were easily done previously. DO NOT CONTINUE to use under these conditions. Follow
the charging procedure.
Under certain conditions, with the charger plugged in to the power supply, the exposed
charging contacts inside the charger can be shorted by foreign material. Foreign materials
of a conductive nature such as, but not limited to, steel wool, aluminum foil, or any buildup
of metallic particles should be kept away from charger cavities. Always unplug the charger
from the power supply when there is no battery pack in the cavity. Unplug charger before
attempting to clean.
Do not immerse charger in water or any other liquid.
WARNING!
Do not allow any liquid to get inside charger. Electric shock may result. To
facilitate the cooling of the battery pack after use, avoid placing the charger or battery pack in
a warm environment such as in a metal shed, or an uninsulated trailer.
WARNING!
Never attempt to open the battery pack for any reason. If the plastic housing of
the battery pack breaks or cracks, return to a service center for recycling; do not put it into
further use
Switch on
Squeeze the front handle switch (1).
Squeeze the front trigger switch (2).
Switch off
Release the front handle switch (1) or the trigger switch (2).
WARNING!
Never attempt to lock a switch in the on position.
Additional safety instructions for batteries and chargers
Batteries
Never attempt to open batteries.
Do not expose batteries to water.
Do not expose to fire!
Do not store in locations where the temperature may exceed 40℃
Do not leave the battery pack in the charger when the charging is finished, otherwise battery
leakage may occur.
Charge only at room temperature.