Fieldmann FZF 2001-E, Руководство пользователя, Страница: 10 / 92

EN 9
FZF 2001-E
Operating instructions
If you are not using the product, or if you know that you will not be using it soon, turn it off and disconnect
the power cable from the wall socket. Prior to cleaning, proceed in the same manner.
Always pull the power plug from the mains, if:
- you leave the machine,
- the machine starts to vibrate unusually (inspect immediately).
Electrical safety
The garden vacuum/blower can be inserted into any light power socket (with an alternating current of
230 V). Permissible is, however, only a socket protected by a 16 A protective switch and a protective switch
against false current with max. 30 mA.
Use only undamaged power cables. The cables cannot be of any length (max. 50 m), otherwise the power
of the electrical motor will be reduced. The power cable to the machine must have a cross section of
3 × 1.5 mm
2
. The insulation on cables of garden machinery is very often damaged. The causes of this are:
- damaged caused by driving over the cable
- compression of the cable when it goes under doors, windows, etc.
- cracks caused by the ageing of the insulation
- broken places caused by unprofessional connections or cable routes.
Cables damaged in this way are often used despite the fact that they are deadly. Cables, power plugs and power
sockets must meet the following conditions. Electrical cables for connecting the garden machine must have
rubber insulation.
The machine should be powered using automatic current protection with a starting current larger than
30 mA.
For extension cords up to 15 meters long use a wire cross-section of 1.5 mm
2
.
For extension cords longer than 15 meters and shorter than 40 meters use a wire cross-section of 2.5 mm
2
.
Cables damaged in this way are often used despite the fact that they are deadly. Cables, power plugs and
power sockets must meet the following conditions. Electrical cables for connecting the garden machine
must have rubber insulation.
Electrical cables must be at least type H05RN-F, with 3 conductors. The cable must be marked with a print.
So buy only cables labelled with a print. Power plugs and connecting sockets on electrical cables must be
from rubber and protected against spraying water. The cables must not be of any length. Longer cables
require a larger cross section. Regularly inspect the power and connecting cables for damage. During an
inspection power cables must be disconnected. Fully unwind the power cable. Also inspect broken places
on the connecting cables at the power plug and the connecting power sockets.
The connecting power sockets on connecting elements must be made from rubber, soft PVC or another
thermoplastic material of the same strength, or must be coated with this material.