Fieldmann FZD 5010 E, Руководство пользователя

Страница: 7 / 108

EN
SILENT SHREDDER USER'S MANUAL
7 For you own safety
Electrical safety
The machine may only be connected to a power socket with a properly installed protective contact.
The machine must be protected by a residual current device (FI switch) with a rated false current not
exceeding 30 mA.
Prior to connecting the machine it is necessary to ensure that the mains connection corresponds to the
values for the connection of the machine.
The machine may only be used within the indicated current, power and speed limits (see rating label).
Do not touch the power plug with wet hands! Always pull the plug holding the connector, not the cable.
Do not bend, crimp, clamp, pull or drive over the power cord; protect it against sharp edges, oil and heat.
Do not lift the machine by the power cord and do not use the power cord for any other purposes.
Prior to every use, inspect the plug and power cord.
In the event that the power cord is damaged, immediately unplug the plug. Do not use a machine with
a damaged power cord.
If the machine is not being used, the power plug must always be unplugged.
Ensure that the machine is turned off before plugging in the power plug.
Always turn off the machine before unplugging the power plug.
Make sure there is not current in the machine before transporting it.
Maintenance
Pull the power plug out of the power socket before performing any type of work on the machine.
Only the maintenance and troubleshooting described in this user's manual may be performed. All other work
must be performed by a professional.
Use only original spare parts. Only these spare parts are designed for the machine and appropriate.
Other spare parts will not only result in the warranty becoming void but may also endanger you and your
surroundings.
Notifications specific to this machine
Do not reach into the filling funnel or the ejection chute while it is running. The machine continues to run
down for approx. 5 seconds after it is turned off.
The machine must be assembled according to the instructions before it is turned on.
Check that all screws, bolts, nuts and other fastening components are firmly tightened and that protective
elements are properly installed before turning it on.
When working with the machine, make sure to maintain a stable and natural stance.
Work only under good light and visibility conditions.
The operator's clothing must be tight-fitting. Loose clothing must be eliminated. Wear solid footwear and long
work pants.
Only use the machine outdoors on a firm even surface.
Leave sufficient free space around the machine when using it. Do not stand the machine close to a wall.
Do not lift, tilt or transport the machine when it is running.
Before starting the machine, check that the insertion funnel is empty.
Never leave a running machine without supervision.
Make sure that no foreign objects enter the machine when it is running, e.g. rocks, glass, metal, soil, plastic,
etc. The could damage the motor and the cutting roller.
If foreign objects enter the cutting mechanism or the machine makes unusual noises or vibrates unusually,
immediately stop the motor and allow the machine to come to a complete stop.