Fieldmann FDV 1002-A, Инструкция по эксплуатации, Страница: 11 / 21

EN 12
FDV 1002-A
Instructions for proper use | Operating instructions
More advice about drilling
1. We recommend to secure the workpiece to the workbench so that you achieve the best results and safely
operate the tool.
2. Use only sharpened drill bits. Blunt drill bits put an unnecessary load on the drill and may cause the motor to
burn.
3. Always ensure that you are using the correct working tool for the task being performed.
4. When performing high precision drilling it is best to use a drill bit with a guiding rod. Non-ferrous materials
like thin metal sheets are very diffi cult to drill. When performing high precision drilling place a piece of wood
underneath the drilled material and then drill an opening through both pieces of material.
ATTENTION:
When drilling it is not unusual for the drill bit to jam. In such a case there is a large momentum
reaction. Always pay attention to what you are doing and hold the drill fi rmly to prevent possible damage or
injury.
ATTENTION:
Do not hold the trigger button down in the on position using adhesive tape or by other means.
The electrical circuit in the tool would not work correctly, which could lead to overheating and subsequent
damage to the tool.
Overload
If the tool becomes overloaded, the motor may be damaged. Increased pressure on the tool will not result in
speeding up work. The effect of greater pressure on the tool will only lower effectiveness, which may cause the
battery to go fl at prematurely and may also destroy the motor. Non-standard types of work and the effect of
excessive pressure will shorten the operating lifetime of the tool.
6. OPERATING INSTRUCTIONS
Operation
This product must not be used by children and persons with physical or mental impairments or by
inexperienced persons, unless properly trained or schooled in the safe use of the product, or unless they
have been properly supervised by a qualifi ed person who will be responsible for their safety.
Use extra care if the product is used near children. Always keep the appliance out of reach of children.
Children must be supervised to ensure that they do not play with the product.
Never allow children or persons who do not know the contents of this user's manual to work with the device.
Local regulations may set the minimum age of the user. The user is responsible for damages caused to third
parties in the machine's working area as a result of its use.
Do not use the machine if your are tired, under the infl uence of alcohol or narcotics.
If necessary, use personal protection aids (gloves, work footwear, eye protection, respirators, etc.). Personal
protection aids reduce the risk of injury to persons.
Dress appropriately. Do not wear loose clothing or jewellery and make sure that your hair, clothing or gloves
do not come dangerously close to moving parts. Loose clothing, jewellery or long hair may become caught
in the moving parts.