Fieldmann FDS 10102-A, Инструкция по эксплуатации, Страница: 6 / 8

IDI
5
Assembly of the machine I Putting into operation I Instructions for proper use
Setting the working position of the machine (see pie. 10)
p
「
ess the handle pivot switch (pie. l, no. 2) and turn the handle clockwise until it clicks in: in this way
the handle will come into a horizontal position
「
elative to the head of the screwdriver. P
「
ess the handle
pivot switch (pie. l, no. 2) and turn the handle back anticlockwise again until it clicks into the pistol
position of the screwdrive
「
PUTTING INTO OPERATION
Charging the machine (see pie. 11)
If you wish to cha
「
ge the batte
「
y, connect the adapter to a powe
「
socket (230 V - 50 Hz) and inse
「
t the
charge
「
connecto
「
into the jack in the handle of the machine (pic. l, no. 4). The
「
ed cha
「
ging indicator
light will turn on.
国Note: The recha
「
ging time is in the range from 3 to 5 hours
Turning on the machine
&. ATTENTION: Start or
「
elease the start switch carefully acco邸ng to the manufactu阿s inst
「
uctions
Turn on the charged machine using the On/Off switch (pic. l, no. 5). Operation will be shown on the
LED display (pic. l, no. l). Turn off the machine by releasing the switch, the chuck will stop turning
&. ATTENTION: The chuck continues to rotate for a while after the machine has been turned off
INSTRUCTIONS FOR PROPER USE
Screwing/unscrewing
The SC
「
ewdriver is equipped with a sc
飞
wing/unsc
「
ewing switch (pie. 1 no. 3), which changes the
rotation direction of the chuck
1. To screw - clockwise rotation of the chuck - set the switch left (press the switch ma
「
ked L), a green
indicator light will turn on�
2. To unsc
「
ew - anticlockwise rotation of the chuck - set the switch right (p
「
ess the switch marked R),
a g
「
een indicato
「
light will turn on巳
略宝把扭H
FDS 1010
2
-A