Fieldmann FDK 201202-E, Руководство пользователя, Страница: 11 / 23

EN 12
Safety instructions
FDUK 201202-E
5. SAFETY INSTRUCTIONS
Before use, please read these safety instructions and keep them in a safe place.
ATTENTION! This symbol indicates risk of injury or damage to the equipment.
ATTENTION! Upon failure to follow the instructions specified in this manual, the e is a risk of injury.
ATTENTION! Electric circular saw conforms to applicable technical regulations and standards.
ATTENTION! Before putting the circular saw aside, make sure all moving parts have stopped.
Special Safety Instructions for Operation of the Circular Saw
ATTENTION! Risk of Injury! Turn off the saw and unplug the plug from the outlet before attempting to install or
remove the circular-saw blade. This way you prevent the circular saw from being accidentally started.
The root of the circular-saw blade should always be in tight contact with the cut material.
Keep your hands away from the circular-saw blade.
Never touch the bottom of the material during cutting.
Make sure the circular-saw blade is sharp, undamaged and correctly adjusted. Otherwise, the cutting edge could break
and cause damage to the circular saw or operator’s injury.
Do not touch the circular-saw blade immediately after cutting. It could be hot.
Remove the adjustment key from the saw before starting the work.
Some machined materials may contain preservative substances which could be toxic. Avoid inhaling saw-dust while
machining such materials.
When cutting thin materials, make sure that the cut-off parts do not get into the retractable guard of the saw.
ATTENTION! Wear dust mask and protective goggles while performing dusty work. Wear protective goggles
conforming to DIN 58214 standard. If the circular saw is used without eye protection, foreign particles could get lodged
in your eyes (such as cuttings or matchwood). This could permanently damage your eyesight. Using protective goggles
that do not conform to DIN standard could result in serious injury for the reasons of possible shattering of the protective
glass.
ATTENTION! Choose appropriate circular-saw blade for the work you intend to do. Use this circular saw only for
cutting wood, wooden materials and soft metals such as aluminium. Other materials could tear, rip or spring up, get
hitched on the circular-saw blade or cause other danger.
ATTENTION! Choose appropriate circular-saw blade for the work you intend to do. Use this circular saw only for
cutting wood, wooden materials and soft metals such as aluminium. Other materials could tear, rip or spring up, get
hitched on the circular-saw blade or cause other danger.
ATTENTION! Do not use grinding discs.
- The arrow on the circular-saw blade indicating the running direction must indicate the same direction as
the arrow on the circular-saw guard. The teeth of the circular-saw blade must match the running direction
of the saw (downwards and forward).
- Keep the circular-saw blade and the clamping surface of the flange clean. The flange of † circular-saw
blade must always fit i wards into the rotating dropping guard (towards the circular-saw blade).
- Make sure that all clamping devices and locking devices have been tightened and that no parts shows
excessive idle travel.
ATTENTION! Never cut objects while holding them in your hand.