8.2 NO picture after Turning on the power
Check signal cable contact are in good condition, a monitor is
①
synchronized with the input signal, and can press the
"SOURCE/EXIT" give it a try. If in the RF channel, please check
to see if the transmitter has been work.
Check signal cable connecting, and make sure use the standard
②
adapter connect the monitor. If power supply by battery, please
check the battery whether fully charged.
8.3 Images are not synchronized:
①
Open OSD and choose "function" to check if the color format is match
with the video input format. Try to change the other formats. Pal/Ntsc
The RF signal is too weak.
②
8.4 No sound:
①
Press the volume button "+", try increasing the volume.
②
Check the AUDIO input and ensure there is an AUDIO singnal
Transmitting from transmitter when RF receiving.
8.5 RF, no signal detected:
①
Transmitter is working properly or not.
②
Transmitter frequency matches with the receiver frequency band.
③
If changed the receiving antenna, please note that must be matched
with the transmitter, otherwise may cause low receiving sensitivity
and can't receive signals.
④
Try re-searching or setting the channel by manual.
■
Remark: If there are still other problems, please contact our customer support
22
