FIELD OF VIEW GeoSnap Pro, Руководство пользователя

Страница: 26 / 34

© Field of View 2018 GeoSnap Pro User Manual
26 26
OPERATIONS CHECKLIST
GeoSnap Pro file setup
□ File name type (Sony, Canon, etc)
□ Trigger mode (distance, time, etc)
□ Trigger mode parameter (# meters or # seconds)
□ Resend trigger time (typically around 750ms)
□ Control mode (none, button toggle, etc)
□ GPS antenna offset (optional)
□ Delete IMAGENUM.txt file off of the card if you want the IMG log to start at 1
Camera setup
□ Insert fully charged battery into camera
□ Insert empty SD card into camera
□ Make sure all of the settings are correct
o
Shutter priority, 1/1000s (shutter speed)
o
ISO Auto
o
White Balance Sunny/Cloudy
o
MF (Manual Focus) – lens focused at infinity and taped down
o
Single capture – remote shooting
o
Large image quality
Pre-flight system checks
□ Lens cap is off camera and lens is clean
□ Hotshoe module is on the camera and tightened down
□ GeoSnap/camera trigger cable is in place and secure
□ GeoSnap microSD card is in the GeoSnap control module
□ GeoSnap GPS antenna is connected and antenna is mounted securely
□ GeoSnap and camera are securely mounted on aircraft
Powering the system
□ Power on camera
□ Plug in GeoSnap
□ Watch for GPS lock on GeoSnap (green LED will start flashing quicker)
□ If in distance trigger mode, watch for first trigger (when GPS lock is obtained)
□ Take-off and perform dynamic motion to initialize VN-200
Post-flight
□ Press and hold GeoSnap onboard button to stop logging
□ Power down GeoSnap and camera
□ Remove GeoSnap microSD card and camera SD card